• The direct drive spindle features minimum vibration, minimum noise and minimum hear generation. This assures high accuracy for machining and rigid tapping.
• The spindle is driven by a powerful 13 KW motor.It provides 12,000 rpm(optional 15,000 rpm) high speed running. The spindle is 3-point supported by 3 pairs of angular contact ball bearings, assuring high rigidity, high precision and high cutting load resistance, The spindle is ideal for both high speed precision machining and heavy duty machining.
• The spindle stock features a labyrinth structure combined with air blast device to fully prevent cutting fluid and dust from entering. This also ensures the spindle accuracy and its long service life.

• High precision linear motion guides feature minimum friction and zero backlash in each direction, and they are full load resistance. Lifetime rigidity, dynamic stability and positioning accuracy are guaranteed.
• The precision class C3 ball screws are pre-tensioned for upgrading the rigidity of the serve system. This avoids positioning displacement caused by thermal expansion of the ball screws while also ensuring machining accuracy.
• 3 axes ball screws are directly driven by AC servomotors and coupled through high performance high torque and high precision couplings. They fully avoid flexible deformation while upgrading positioning and repeatability accuracy under a heavy load condition.
• The Z-axis has no counter-balance system but is directly driven by a powerful motor.
  It provides extremely smooth high speed motion and high response on the Z-axis- also ensuring high machining accuracy and high speed drilling and tapping operations.

• The arm type ATC is driven by a cam mechanism for fast tool changing which is accomplished in only 2.5 seconds (tool to tool). 1.3 seconds tool change time is optional.
• Rapid traverses on X/Y/Z axes are 40W/min to shorten non-cutting time and upgrade efficiency.
• The chip flushing device (standard equipment) has coolant nozzles mounted of both sides of the base. The powerful coolant flushes chips to the chip auger and then the chips are delivered to the back side of machine. It saves cleaning work for added efficiency.

The CNC rotary table is program controlled through the machine control system. It permits multi-surface machining and complex surface machining in a single workpiece setup. This reduces workpiece setup times while upgrading the geometric accuracy and productivity.

The coolant through spindle device provides powerful fluid spray pressures up to 20 kg/cm². The high pressure cutting fluid is delivered directly to the cutting edge for effectively cooling the cutter. The hole machining. It not only extends tool service life but upgrades machining efficiency, facilitates chip exhaust and improves surface quality.